Silver Seahawk BRX

Silver Seahawk BRX

Silver Seahawk BRX is a spacious open boat designed especially for day trips and access boating on vast waters. Due to the durable aluminum hull and the sturdy construction, the BRX can also be utilised year-round in areas where the sea/lake does not freeze over in wintertime. Behind the two steering consoles all passengers travel sheltered from draught and seasprays. The stern cockpit is very spacious, and can fit even two additional comfort seats of 1-2 modular seating boxes as extensions to the stern bench.

Request offer

A durable and extremely spacious bow rider for day trips and access boating

Silver Seahawk BRX is a durable open boat with dual steering consoles, especially designed to withstand the wear and tear of an active boating lifestyle on vast waters. It is well suited for day trips and access boating in the archipelago, but can take almost anything you throw at it. The strong pure aluminium hull ensures well-balanced and steady rides in all weather conditions. All Silver Seahawk models, as well the whole of the Silver model range, are still to this day made in Finland.

Silver Seahawk BRX is an open aluminum boat designed especially for day trips and access boating. All passengers can take shelter from draught in the stern cockpit behind the steering consoles, complete with a two-part middle door. The open bow has a large storage capacity inside the bench on the port side and in the front seat, as well as an open compartment for mooring lines in the very bow. The steering consoles of the BRX are wider than usual, making it possible to install even a 16” chartplotter onto the control panel. Both consoles also have good storage spaces for small personal belongings.

The frameless windshield ensures great visibility in all directions, at the same time as it gives the boat a streamlined and modern look. Although the windshield is frameless, we have added railings to the side windows for added safety. The windshield is made out of hardened glass, which means it does not easily scratch and it also makes installation of windshield wipers possible. The side windows continue far along the sides, offering good shelter also for the passengers sitting in the back.

Spacious stern and comprehensive accessories

The stern cockpit of the Silver Seahawk BRX is so spacious that it can easily accommodate either two additional comfort seats or 1-2 additional seat boxes as extensions to the stern bench. With the help of the modular seat boxes a U or L shaped sofa can be formed in the back, adding to the comfort especially when used mainly for day trips and leisure rides. The co-pilot’s comfort seat can also be upgraded into a wider bench-like seat with a folding backrest. The wider, padded bench-seat comes with a drawer fridge underneath. The standardly fitted comfort seats can be equipped with offshore suspension pedestals, making sea journeys more comfortable also in harsher conditions. However, ergonomics and comfort have been considered for all passengers, not only the driver and co-driver. 

In addition to a comprehensive set of standard equipment, the BRX model also has a wide array of additional accessories available. Some of the add-ons include a bow thruster, a 2-part stern canopy, a steering wheel with tilt function, an automatic trim tab panel and a table for the stern seating area. As standard the Seahawk BRX comes equipped with e.g. 30mm thick side railings and the canopy storage compartment behind the stern bench.

All three Silver Seahawk models are built on the same stable and sturdy aluminum hull. The hull is made without any lifting strakes, guaranteeing smooth and balanced rides, and the low plaining threshold ensures that the boats can be driven on plane even in harsh conditions that might require low speed. An even aluminum flooring without any thresholds or steps, as well as the sturdy aluminum side railings and high freeboards increase safety onboard.



Silver Seahawk BRX


Silver Seahawk BRX

Length
7,05 m
Width
2,40 m
Weight
approx. 1260 kg
Number of passengers
8
Total load capacity
845 kg
Engine
150-200 hp
Maximum recommended engine weight
290 kg
Approval
CE/C
Deadrise angle
20°
Length, remote control cable
670 cm
Self-draining
Hull
Aluminium
Seat boxes
Aluminium
Steering console
Fiberglass
Railings
Ø30mm aluminium
Windshield
Glass
Fuel tank
220 L
  • Aluminum flooring
  • Aluminum cleats in bow and stern
  • Aluminum swimming platforms
  • Boarding/swimming ladder in stern
  • Bow eye security loop (sec.class 3 approved)
  • Canopy storage
  • Compartments for anchor and mooring lines in bow and stern
  • Construction according to CE standards, self-bailing open deck
  • Cup holder
  • Cushions for stern bench
  • Electric, automatic bilge pump
  • Electric outlet 12 V
  • Fire extinguisher
  • Footrest in aluminum for driver and co-driver
  • Fuel filter
  • Fuel tank 220 litres
  • Fully padded Offshore comfort seats 2 pcs
  • Full-width stern bench with storage space underneath
  • Hydraulic steering
  • Navigational lights
  • Raymarine Axiom+ 9 RV chartplotter, NMEA network and CPT-S transducer
  • Side railings in durable aluminum, Ø 25mm
  • Storage/seat box on the port side of the open bow
  • Trailer lugs in bow and stern
  • Transducer bracket with slide rail
  • Trolling Control feature (not available for Honda BF200 D XRU)
  • Windshield out of hardened glass + windshield side railings
  • 4G router
Product code Accessory
KUO70070 Stern canopy, 2-part. Dark grey.
KUO70075 Harbor canopy, grey.
LISA30115 Trim tabs (with Joystick)
LISA30116 Mente Marine ACS-R automatic trim panel
LISA30100 Bow thruster 1,5kW / 28 kgf, incl. Joystick
LISA70070 Windshield wiper SB
LISA20059 Flag pole (fasteners and pole)
ASE90075 Upgrade to a 12" Raymarine Axiom+ chartplotter
TY90094 Seat cushions, bow
LISA40068 Mounting plate for bow engine
TODD10086 Height-adjustable comfort seat pedestal
LISA20090 Suspension seat base for comfort seat (4S). Incl. swivel and glide functions, adjustable 50-130 kg
LISA20042 Arm rest, driver
LISA20044 Arm rest, co-driver
LISA70019 Double battery system
LISA40054 Bow A rail (shark fin), SB
LISA40053 Bow A rail (shark fin), port side
UIS20050 Rod holder HST, bottom mount, for Ø 30mm railing
UIS20055 Rod holder HST, top mount, for Ø 30mm railing
UIS20060 Rod holder HST, middle mount, for Ø 30mm railing
UIS50041 Downrigger holder HST, mounted onto Ø 30mm railing
ASE90064 Upgrade to CHIRP RV-100 3D RealVision transom transducer

**Please note that changes to additional accessories are possible. Some accessories are still missing from the list.

Close
Close